Clarion VRX878RVD, Owner'S Manual & Installation Manual

Page: 63 / 79

5.1 ch Surround Decoder Operations
67
VRX878RVD
English
Owner
’s ma
nua
l
●
FILTER
This function is used to select filter frequencies
that suit the speakers that are used.
* This function is not available for speakers whose
SPEAKER SEL setting is set to “
OFF ”.
●
SPEAKER GAIN
This function sets speaker output level.
* This function is not available for speakers whose
SPEAKER SEL setting is set to “
OFF ”.
●
DELAY
This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.
* This function is not available for speakers whose
SPEAKER SEL setting is set to “
OFF ”.
●
DRC
This function sets the dynamic range
compression.
3-1. Touch the [
]
] key of the FILTER item to
show the submenu.
3-2. Touch the [
[
] or [
]
] key of the FRONT HPF,
CENTER HPF, SURROUND HPF or
SUBWOOFER LPF item to adjust.
[ FRONT HPF ]:
This function can be set to the following four
settings: 50 Hz, 80 Hz, 120 Hz or THRGH
(through). “
THRGH ” is the default value.
[ CENTER HPF ]:
This function can be set to the following
three settings: 50 Hz, 80 Hz and 120 Hz.
“
120 Hz ” is the default value.
[ SURROUND HPF ]:
This function can be set to the following four
settings: 50 Hz, 80 Hz, 120 Hz or THRGH
(through). “
THRGH ” is the default value.
[ SUBWOOFER LPF ]:
This function can be set to the following
three settings: 50 Hz, 80 Hz and 120 Hz.
“
120 Hz ” is the default value.
3-1. Touch the [
]
] key of the SPEAKER GAIN
item to show the submenu.
3-2. Touch the [
[
] or [
]
] key of the FRONT L,
CENTER, FRONT R, SURROUND R,
SURROUND L or SUBWOOFER item to
adjust.
Each item is adjustable in the range –10 dB
to +10 dB in 1 dB step increments. The
default value is “
0 dB ”.
3-1. Touch the [
]
] key of the DELAY item to show
the submenu.
3-2. Touch the [
[
] or [
]
] key of the CENTER SP
or SURROUND SP item to adjust.
[ CENTER SP ]:
Adjustments are made in the range from 0
ms to 5 ms. The default value is “
0 ms ”.
[ SURROUND SP ]:
Adjustments are made in the range from 0
ms to 15 ms. The default value is “
0 ms ”.
3-1. Touch the [
C
] key to display the next menu
screen.
3-2. Touch the [ MAX ], [ STD ] or [ MIN ] key of the
DRC item to select respective item. The
default value is “
MAX ”.