Clarion VRX878RVD, Owner'S Manual & Installation Manual

Page: 64 / 79

5.1 ch Surround Decoder Operations
68
VRX878RVD
English
Owner
’s ma
nua
l
DSF mode
DSF effect ON/OFF
• The factory default setting is “ OFF ”.
1. Press the [ ADJ ] button, and touch the
[ AUDIO ] key.
2. Touch the [
]
] key of the STATUS item.
3. Touch the [ ON ] or [ OFF ] key of the DSF item
to turn the function ON or OFF.
4. Touch the [ Back ] key to return to the previous
screen.
Note:
• If the DSF effect is set to OFF, the adjustment
made in “
DSF ” is not reflected in the music source.
Selecting the DSF type
1. Press the [ ADJ ] button, and touch the
[ AUDIO ] key.
2. Touch the [
]
] key of the DSF item.
3. Touch the key for the desirable type to select.
4. Touch the [
Back ] key to return to the previous
screen.
P.EQ mode
P.EQ effect ON/OFF
• The factory default setting is “ OFF ”.
1. Press the [ ADJ ] button, and touch the
[ AUDIO ] key.
2. Touch the [
]
] key of the STATUS item.
3. Touch the [ ON ] or [ OFF ] key of the P.EQ item
to turn the function ON or OFF.
4. Touch the [ Back ] key to return to the previous
screen.
Note:
• If the P.EQ effect is set to OFF, the adjustment
made in “
P.EQ ” is not reflected in the music
source.
Setting and storing P.EQ Properties
1. Press the [ ADJ ] button, and touch the
[ AUDIO ] key.
2. Touch the [
]
] key of the P.EQ item to display
the submenu.
3. Touch the key for the desirable type to select.
The P.EQ adjustment contents are as follows:
[
SIGNAL ]:
This function selects “ MUSIC ” or “ P. NOISE ”.
• The factory default setting is “ P.NOISE ”.
[ SPEAKER SELECT ]:
This function selects “ FRONT ”, “ CENTER ” or
“ SURROUND ”.
• The factory default setting is “ FRONT ”.
* This setting is disabled when both the
CENTER SP and SURROUND SP items of the
SPEAKER SEL setting are set to “
OFF ”.
* This function is not available for speakers
whose SPEAKER SEL setting is set to “
OFF ”.
[ BAND ]:
Select the channel to be compensated
(“
BAND1 ”, “ BAND2 ”, “ BAND3 ”).
• The factory default setting is “ BAND1 ”.
[ FREQUENCY ]:
Select the centre frequency that you want to
compensate from the range of 18 Hz to 20
kHz. (1/3 octave step, 31 points)
• The factory default setting is “
1 kHz ”.
[ Q ]:
Set the sharpness of the Q-curve to one of the
parameters: 1, 3, 5, 7 and 20.
• The factory default setting is “
1 ”.
[ GAIN ]:
Adjust the gain (output level) in the range of
–6 dB to +6 dB. (1 dB step, 13 points)
• The factory default setting is “
0 ”.
4. Touch the [ Back ] key to return to the previous
screen.