Digital Radio/DAB Operations
63
VRX878RVD
English
Owner
’s ma
nua
l
Storing a programme to preset
memory
1. Press the [
BAND
] button or touch the [
Band
]
key to select the desired band (M1, M2 or
M3).
2. Receive the programme you wish to store by
performing the seek tuning, etc.
3. Touch the [
List
] key.
4. Touch and hold the desired preset key for
more than 2 seconds to store the current
programme.
Information standby mode
When the Information programme selected in the
INFO SELECT screen of the DAB Option menu
starts, the unit switches to the selected
Information programme automatically.
• For details on Information Select, refer to the
section “
Information select
” below.
1. Keep pressing the [
TA
] button more than 1
second.
“
INFO
” is displayed on the screen, and this
unit enters to the Information standby mode
until information starts.
• If you press the [
TA
] button while the
Information programme is being received,
receiving programme is cancelled, and the
unit enters to the Information standby
mode.
2. To cancel the Information standby mode,
keep pressing the [
TA
] button again more
than 1 second.
Note:
•
Only when the DAB tuner is connected, this can be
operated even in the RDS mode.
Information select
This function allows you to specify a type of
Information for the Information interrupt mode.
You can set any of the following 6 types of
Information:
TRAVEL, WARNING, NEWS, WEATHER ,
EVENT, and SPECIAL.
1. Touch the [
Option
] key, and then touch the [
]
]
key of the INFO SELECT item.
The INFO SELECT screen is displayed.
2. Touch the [
ON
] or [
OFF
] key of the desired
Information item.
3. Touch the [
Back
] key to return to the previous
screen.
PTY
This function enables you to listen to the selected
programme type, regardless of the function
mode.
• DAB and RDS have the same PTY.
• You can select one PTY from DAB or RDS.
• PTY broadcast are not yet available in all
countries.
• In the information standby mode, INFO stations
have priority over PTY stations.
• In the TA standby mode, TP stations have
priority over PTY stations.
Dynamic Label Function
A dynamic label (hereinafter referred to as “DLS”)
is a text data associated with each DAB service.
This unit can display a DLS up to 128 characters
on the screen.
DLS display mode
Normally, 16 letters x 1 line are displayed on the
DAB mode screen.
1. Touch the [
]
] key on the DAB mode screen to
display all DLS text.
2. To cancel the DLS mode and return to the
previous screen, touch the [
Back
] key.
If there is a DLS data in the reception service,
the DLS text is displayed in the text displaying
area.
DLS memory
Up to 6 DLSs, currently being received, can be
stored.
1. Touch the [
]
] key on the DAB mode screen.
2. Touch and hold the desired preset [
1
] to [
6
]
key more than 2 seconds.
The DLS data currently being displayed is
stored.
DLS calling
1. To call the DLS stored in the DLS memory,
touch the desired preset [
1
] to [
6
] key.
The DLS data in the DLS memory is displayed
up to 128 characters.
2. To cancel the DLS mode and return to the
previous display, touch the [
Back
] key.
