5.1 ch Surround Decoder Operations
61
VRX766VD
English
Owner
’s ma
nua
l
DSF mode
DSF effect ON/OFF
*
The factory default setting is “
OFF
”.
1. Press the [
ADJ
] button, and touch the
[
AUDIO
] key.
2. Touch the [
]
] key of the STATUS item.
3. Touch the [
ON
] or [
OFF
] key of the DSF item
to set the function ON or OFF.
4. Touch the [
Back
] key to return to the previous
screen.
Note:
•
If the DSF effect is set to OFF, the adjustment
made in “
DSF
” is not reflected in the music source.
Selecting the DSF type
1. Press the [
ADJ
] button, and touch the
[
AUDIO
] key.
2. Touch the [
]
] key of the DSF item.
3. Touch the key for the desirable type to select.
4. Touch the [
Back
] key to return to the previous
screen.
P.EQ mode
P.EQ effect ON/OFF
*
The factory default setting is “
OFF
”.
1. Press the [
ADJ
] button, and touch the
[
AUDIO
] key.
2. Touch the [
]
] key of the STATUS item.
3. Touch the [
ON
] or [
OFF
] key of the P.EQ item
to set the function ON or OFF.
4. Touch the [
Back
] key to return to the previous
screen.
Note:
•
If the P.EQ effect is set to OFF, the adjustment
made in “
P.EQ
” is not reflected in the music
source.
Setting and storing P.EQ Properties
1. Press the [
ADJ
] button, and touch the
[
AUDIO
] key.
2. Touch the [
]
] key of the P.EQ item to display
the submenu.
3. Touch the key for the desirable type to select.
The P.EQ adjustment contents are as follows:
[
SIGNAL
]:
This function selects “
MUSIC
” or “
P. NOISE
”.
*
The factory default setting is “
P.NOISE
”.
[
SPEAKER SELECT
]:
This function selects “
FRONT
”, “
CENTER
” or
“
SURROUND
”.
*
The factory default setting is “
FRONT
”.
*
This setting is disabled when both the
CENTER SP and SURROUND SP items of the
SPEAKER SEL setting are set to “
OFF
”.
*
This function is not available for speakers
whose SPEAKER SEL setting is set to “
OFF
”.
[
BAND
]:
Select the channel to be compensated
(“
BAND1
”, “
BAND2
”, “
BAND3
”).
*
The factory default setting is “
BAND1
”.
[
FREQUENCY
]:
Select the center frequency that you want to
compensate from the range of 18 Hz to
20 kHz. (1/3 octave step, 31 points)
*
The factory default setting is “
1 kHz
”.
[
Q
]:
Set the sharpness of the Q-curve to one of the
parameters: 1, 3, 5, 7 and 20.
*
The factory default setting is “
1
”.
[
GAIN
]:
Adjust the gain (output level) in the range of
–6 dB to +6 dB. (1 dB step, 13 points)
*
The factory default setting is “
0
”.
4. Touch the [
Back
] key to return to the previous
screen.
280QC6823KA_00.0_EN.book Page 61 Monday, February 27, 2006 9:22 AM
