22
diagnostics
The system’s microprocessor monitors and reports all active and violated zones when arming and dis-
arming. LED flashes indicate the active or violated zone; siren chirps indicate system status.
arm/disarm diagnostics
The number of siren chirps will indicate the status of the system when arming and disarming. For infor-
mation on which zone is active or has been violated refer to the Table of Zones.
system status chirps
table of zones
N
NO
OTTEE:: The Warning response does not report on the LED.
Zone No.
Trigger type
Input description
1
Instant
H1/6 BLUE wire. Connect to optional hood/trunk
pins.
2
Multiplexed
BLUE wire of plug-in shock sensor. Inputs
shorter than 0.8 seconds will trigger a Warning
Zone response, while inputs longer than 0.8
seconds will instantly trigger the full alarm
sequence.
3
Two-stage, progresses from
Door switch circuit. H1/5 GREEN or H1/7 VIOLET.
warning to full alarm
4
Multiplexed Input
GREEN wire of plug-in shock sensor. Inputs
shorter than 0.8 seconds will trigger a Warning
Zone response, while inputs longer than 0.8
seconds will instantly trigger the full alarm
sequence.
5
Two-stage (similar to doors)
Ignition input. H1/9 YELLOW.
Action
Number of Chirps
Description
Arm
1
System armed
Arm
1 (3 second delay), 1
System armed with an open zone(s) bypassed
Disarm
2
System disarmed
Disarm
4
System disarmed with tamper alert
Disarm
5
System disarmed false alarm prevention active
