23
security diagnostics
The system stores the last two full triggers in memory. These are not erasable. Each time the unit sees
a full trigger, the older of the two triggers in memory will be replaced by the new trigger. To access long
term event history:
1.
With the ignition off, press and hold the Override switch.
2.
Turn on the ignition.
3. Release the Override switch.
4. Press and release the Override switch within five seconds. The LED will flash in
groups indicating the last two zones that triggered the unit. The LED will flash for one
minute or until the ignition is turned off.
N
NO
OTTEE:: The Warning Zone triggers are not stored to memory and will not be reported.
remote sensor bypass
Remote Sensor Bypass allows the operator to select which inputs and sensors are active during a par-
ticular arming cycle. For a full description of Remote Sensor Bypass operation for testing purposes refer
to the Owner's Guide.
optional anti-car jacking system
This optional feature is designed to disable a vehicle during a carjacking event. It must be programmed
in the features menu and the Starter Kill must be installed for it to work properly. For operational instruc-
tions when testing this feature refer to the Owner's Guide.
false alarm prevention circuitry
This circuitry bypasses any zone that triggers the system more than three times within a one-hour peri-
od. For a full description of operations refer to the Owner's Guide.
IIm
mp
poorrtta
anntt:: When testing the systems sensor and trigger inputs reset the false alarm preven-
tion circuitry by turning on the ignition after every third system trigger.
