Clarion P200 User Manual Download Page 70

Page: 70 / 216

Chapter 4: Entertainment modes

Voice guidance takes priority over
music.

For more information about playing music, see
“Supported audio formats” on page 65.

Equalizing audio

The N.I.C.E. P200’s built-in equalizer can be
configured to produce smooth sound based on the
style of music you listen to most.

On the main menu, tap the SETUP icon.

Tap the A/V button on the left side of the
screen.

The N.I.C.E. P200 displays the Audio/Video
options.

Note

Scroll down until you see the EQ MODE option.

AUDIO/VIDEO options

Tap the EQ MODE option.

The N.I.C.E. P200 displays the five pre-defined
equalizer settings.

Scroll down to view all values.

As their names imply, each setting configures
audio output based on the type of music you
choose: ROCK, POP, JAZZ or CLSS (classical).

Summary of Contents for P200

























































































































































































































Search results

Summary of Contents for P200

Reviews:

Related manuals for P200

Brands by name

Popular brands

Clarion P200, User Manual

Search results

Summary of Contents for P200

Reviews:

Related manuals for P200

Brands by name

Popular brands