Clarion P200 User Manual Download Page 120

Page: 120 / 216

Chapter 8: Reference

120

Main menu buttons

Close the main menu.

Connect the N.I.C.E. P200 to your
computer.

Turn the N.I.C.E. P200’s internal speaker
on and off.

Start navigating with music playing. This
button appears on the main menu only
after initiating navigation.

Navigation reference

Touch-screen buttons

Exit button (F1), returns immediately to
the navigation map.

Zoom in button (F1), expands map
detail.

Multi-option scroll button (F2), for
scrolling up (back) in a list, displays
previous options four at a time.

Zoom out button (F2), shows more of
the map at once.

Navigation options button (F3), starts
navigation and accesses navigation
setup options.

Pointer button (F3), centers the map at
the current location.

Summary of Contents for P200

























































































































































































































Search results

Summary of Contents for P200

Reviews:

Related manuals for P200

Brands by name

Popular brands

Clarion P200, User Manual

Search results

Summary of Contents for P200

Reviews:

Related manuals for P200

Brands by name

Popular brands