Clarion P200 User Manual Download Page 33

Page: 33 / 216

N.I.C.E. P200

Home installation

At home, the N.I.C.E. P200 is powered by the
battery or the 110v power cord and adapter.

Plug the 110v power cord and adapter into the
left side as you face the N.I.C.E. P200.

Left side of the N.I.C.E. P200

Plug the other end of the cord into a live wall
outlet.

To improve satellite reception at home, install a
GPS antenna (NAVGPS).

LCD screen

DC IN socket

Improving audio

As the N.I.C.E. P200 is a portable device and
designed to travel with you, it comes with its own
internal speaker.

To improve the quality of the sound, connect the
optional audio/video output cable (NAVCK) from the
serial port on the cradle to a stereo system (either in
the car or at home). See the documentation that
comes with the cable.

Summary of Contents for P200

























































































































































































































Search results

Summary of Contents for P200

Reviews:

Related manuals for P200

Brands by name

Popular brands

Clarion P200, User Manual

Search results

Summary of Contents for P200

Reviews:

Related manuals for P200

Brands by name

Popular brands