Clarion NX700 Quick Start Manual Download

Page: 84 / 180

If the messages do not display, tap

to download the messages from the

mobile phone.

NOTE:

Not all mobile phone models support the downloading of such data.

Select a message to view the full message.

The screen displays the sender, date and the message. Depending on your
mobile phone model, not all information will be displayed.

NOTE:

You can clear the downloaded messages by tapping

. Doing so does not delete

the data on the mobile phone.

Using the Shortcuts

Once a Bluetooth connection has been established, a shortcut will be saved. You
can then use the shortcut to reconnect a particular device without searching and
entering the passkey again.

Tap the

Connect

button on the Phone Menu.

Summary of Contents for NX700




















































































































































































Search results

Summary of Contents for NX700

Reviews:

Related manuals for NX700

Brands by name

Popular brands

Clarion NX700, Quick Start Manual

Search results

Summary of Contents for NX700

Reviews:

Related manuals for NX700

Brands by name

Popular brands