Clarion NX700, Quick Start Manual

Page: 53 / 180

47
NX700
English
Owner
’s ma
nua
l
❏
Setting the Sub Woofer
Control
You can adjust the volume output to the Sub
Woofer.
• The factory default setting is “
0 ”.
❏
Setting the Sub Woofer Phase
You can reverse the phase of the Sub Woofer
output signal.
• The factory default setting is “
Normal ”.
❏
Adjusting the High Pass Filter
You can adjust the cut-off frequency of the High
Pass Filter for the front/rear speaker output.
• The factory default setting is “
Through ”.
❏
Adjusting the Low Pass Filter
You can adjust the cut-off frequency of the Low
Pass Filter for the subwoofer output.
• The factory default setting is “
Through ”.
❏
Setting the Amp Cancel
When an external amplifier is used, using this
function reduces power noises of the audio lines.
• The factory default setting is “
Off ”.
❏
Setting the BBE MP
This function works only for the sound in the USB
mode, corrects the distorted waveform of the
high-pass area when decoding the digital sound.
• The factory default setting is “
Off ”.
❏
Turning on/off the Magna Bass
EXtend
The Magna Bass Extend does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
• The factory default setting is “
Off ”
3-3. Touch the [
{
] or [
}
] key of the Fader item
to adjust the fader level.
[
{
]:
Emphasizes the sound from the front
speakers.
[
}
]:
Emphasizes the sound from the rear
speakers.
Adjustment range: front 12 to rear 12
• The factory default setting is “
0 ”.
3-1. Touch the [ Others ] key to display the Others
tab screen.
3-2. Touch the [ – ] or [ + ] key of the Sub Woofer
Ctrl item to adjust the output level.
Setting range: –6 to +6
3-1. Touch the [ Others ] key to display the Others
tab screen.
3-2. Touch the [ Reverse ] or [ Normal ] key of the
Sub Woofer Phase item to select the phase
setting.
3-1. Touch the [ Others ] key to display the Others
tab screen.
3-2. Touch the [
[
] or [
]
] key of the High Pass
Filter item to adjust the setting.
Settings: Through, 60Hz, 90Hz, 120Hz
3-1. Touch the [ Others ] key to display the Others
tab screen.
3-2. Touch the [
[
] or [
]
] key of the Low Pass
Filter item to adjust the setting.
Settings: Through, 120Hz, 90Hz, 60Hz
3-1. Touch the [ Others ] key to display the Others
tab screen.
3-2. Touch the [
}
] key to display the next
screen.
3-3. Touch the [ On ] or [ Off ] key of the Amp
Cancel item to turn the Amp Cancel function
on or off.
3-1. Touch the [ Others ] key to display the Others
tab screen.
3-2. Touch the [
}
] key to display the next
screen.
3-3. Touch the [
[
] or [
]
] key of the BBE MP item
to set the correction level.
Settings: Off, Low, Mid, High
3-1. Touch the [ Others ] key to display the Others
tab screen.
3-2. Touch the [
}
] key to display the next
screen.
3-3. Touch the [ On ] or [ Off ] key of the Magna
Bass EX item to turn the Magna Bass
Extend function on or off.