Clarion MC-12X, Owners & Installation Manual

Page: 34 / 52

38
VRX835
English
Owner
’s
manual
Setting and storing DSF Properties/
Memory into USER Pattern
1. Repeat the steps 1 and 2 of the previous
procedure (Calling DSF BASIC Pattern/
USER Pattern) to show BASIC pattern se-
lecting display or USER pattern selection/
memory display.
2. Touch the [ EDIT ] key to show the DSF ad-
justing display.
3. Select an item to be adjusted by touching
[ ITEM ] key in the DSF adjusting display.
There are “ EFFECT ”, “ DELAY ”, “ REAR MIX ”,
“ REVERB TIME ” (ROOM SIZE) and “ HIGH ”
(LIVENESS).
4. Touch the [
w
] or [
z
] key to set each adjust-
ing value.
5. After making adjustments to a desired pat-
tern by repeating the operations of items 3
and 4, touch the [
RTN ] key to change over to
the BASIC/USER patterns selection/memory
display.
6. Press and hold one of [ DIRECT ] button for 2
seconds or longer to store the adjusted DSF
pattern to the USER memory.
7. To set a title of the stored USER pattern,
touch the [ TITLE ] key to change into the
[ TITLE INPUT ] key.
∗
For title inputting method, refer to the section
“
Entering titles ”.
8. Press the [ A-M ] button to change into the
STANDARD display.
Professional mode/VSE
operations
Note:
• The adjustment made in professional mode is not
reflected in the adjustment in standard mode. On
the contrary, the adjustment made in standard
mode is not reflected in the adjustment in profes-
sional mode.
VSE effect ON/OFF
∗
The factory default setting is “ ON ”.
1. Press the [ A-M ] button to show the AUDIO-
MODE display.
2. Touch the [ VSE ON/OFF ] key to select “ on ”
and “ off ”.
3. Each time the [ ON/OFF ] key is touched, the
on and off statuses are switched alternately.
DSP operations
Standard mode/DSF operations
DSF effect ON/OFF
∗
The factory default setting is “ ON ”.
1. Press the [ A-M ] button to show the AUDIO-
MODE display.
2. Touch the [ DSF ON/OFF ] key to select “ on ”
and “ off ”.
3. Each time the [ ON/OFF ] key is touched, the
on and off statuses are switched alternately.
4. After the setting, press the [ A-M ] button
again or touch the [ RTN ] key to return to the
STANDARD display.
Note:
• If the DSF effect is set to OFF, the adjustment
made in “ DSF operations ” is not reflected in the
music source.
Calling DSF BASIC Pattern/USER
Pattern
1. Press the [ A-M ] button to show the AUDIO-
MODE display.
2. Touch the [
z
] key to select DSF mode.
Touch the [ DSF BASIC1 ], [ DSF BASIC2 ]
and [ DSF USER ] key to show BASIC pattern
selecting display or USER pattern selection/
memory display.
3. In the pattern selecting display, touch the one
of pattern key to call corresponding DSF
mode.
In this display, pressing the No. button in cor-
respondence to the [
DIRECT ] key can also
call the DSF mode.
∗
After selecting the DSF mode, touch the
[
MEMO ] key to copy the selected pattern to
the USER pattern.
∗
Touch the [ EDIT ] key to show DSF adjusting
display, in which the properties of currently
selected pattern can be adjusted.
∗
By pressing the [ BAND ] button in BASIC
pattern selecting display or USER pattern
selection/memory display you can switch
between the two patterns, BASIC and USER.
4. After the setting, press the [ A-M ] button
again or touch the [ RTN ] key two times to re-
turn to the STANDARD display.