24
VRX835
English
Owner
’s
manual
VISUAL Operations
This function is available when a VTR, etc. is
connected to the visual 1 or visual 2 terminal.
∗
The visual 1 mode is not available when a DVD
changer is connected to the visual 1.
●
“BRIGHT”:
Adjust the brightness of the display.
●
“HUE”:
Adjust the tone of color (red is emphasized
or green is emphasized)
●
“COLOR”:
Adjust the color saturation.
3. Operate the touch key to adjust a level.
●
“BRIGHT”:
[
–
] key or [
+
] key
●
“HUE”:
[
R
] key or [
G
] key
●
“COLOR”:
[
–
] key or [
+
] key
4. When adjustment is made, touch the [
RTN
]
key to return to the ADJ MENU display.
Touch the [
RTN
] key again to return to the
STANDARD display.
∗
To return from the adjust a level display to the
STANDARD display, press the [
ADJ
] button
once again.
Changing over monitor display size
∗
This function is available only when the panel is
open.
Notes:
• This function is not available while you are driv-
ing.
• Switch to the VTR/TV/DVD video/DVD changer
mode you see.
1. Press the [
DISP
] button to change over the
monitor display size. Each time you press
the [
DISP
] button, the monitor display size
changes in the following order:
“NORMAL”
➜
“WIDE”
➜
“F. WIDE”
➜
“CINEMA”
➜
“NORMAL”
●
“NORMAL”:
(normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
●
“WIDE”:
(wide mode)
The image at right and left ends in a display
elongates horizontally.
●
“F. WIDE”:
(full wide mode)
The whole image elongates horizontally.
●
“CINEMA”:
(cinema mode)
The image at both top and bottom in a dis-
play disappears.
WARNING
For your safety, the driver should not watch
the VTR, etc. or operate the controls while
driving. Please note that watching and op-
erating the VTR, etc. while driving are pro-
hibited by law in some countries.
Switching to the VISUAL mode
Note:
• For your safety, the VRX835 has a safety function
which turns off the picture when the car is mov-
ing, so only the audio can be heard. The picture
can only be watched when the car is stopped and
the parking break is applied.
1. Press the [
FUNC
] buton and select the VI-
SUAL mode.
2. Press the [
BAND
] button to select the VI-
SUAL1 or VISUAL2.
Switching the VTR system between
NTSC and PAL
∗
This function is enabled only when the panel is
open.
Switch to the VTR/DVD video/DVD changer
mode you use.
1. Press the [
ADJ
] button to switch to the ad-
justment selection display.
2. Touch the [
z
] key to select “
VTR N/P
”.
Touch the [
VTR N/P
] key, [
NTSC
] key and
[
PAL
]
key appears in the display.
3. Touch the [
NTSC
] key or [
PAL
] key to select
“
NTSC
” or “
PAL
”.
Adjusting the brightness and tone of color
Notes:
• This operation is available only when the car is
stopped and the parking brake is applied.
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
• Switch to the VTR/TV/DVD video/DVD changer
mode you see.
1. Press the [
ADJ
] button to switch to the ad-
justment selection display.
2. Touch the [
MONI ADJ
] key to display
[
BRIGHT
], [
HUE
] and [
COLOR
] key. Touch
the [
BRIGHT
], [
HUE
] and [
COLOR
] key to
adjust BRIGHT, HUE and COLOR.
