Clarion MC-12X, Owners & Installation Manual

Page: 14 / 52

18
VRX835
English
Owner
’s
manual
Basic Operations
Turning the liquid crystal panel
horizontal (Air conditioner
operation mode)
When the way the liquid crystal panel is
mounted hinders the operation of the air condi-
tioner, the position of the panel can be turned
horizontal temporarily.
1. Press and hold the [ OPEN ] button when the
liquid crystal panel is upright, and release
the button when a beep is heard.
2. The liquid crystal panel turns horizontal.
∗
Press the [ OPEN ] button again when the liquid
crystal panel is in the horizontal position, and
the panel returns to the original position.
∗
Even if the button is not operated for about 10
seconds, the panel returns to the original
position with a warning sound.
Turning on and off the monitor
Pressing and holding the [ DISP ] button for 1
second or longer turns the monitor off. To return
to the monitor on, press the [
DISP ] button once
again.
∗
When a button is pressed or during security moni-
toring, the monitor-off mode is canceled.
Mute
Each time you press the [
s
] button, mute is
turned on and off.
“ MUTE ” appears when mute is turned on.
Setting the Z-enhancer
This unit comes with 3 types of sound tone effect
stored in memory. Select the one you prefer.
∗
The factory default setting is “ Z-EHCR OFF ”.
When a Z-enhancer comes on (1-3), “ Z-EHCR ”
appears in the display.
• “ Z-EHCR 1 ” (Z-Enhancer 1):
Setting emphasizing bass.
• “ Z-EHCR 2 ” (Z-Enhancer 2):
Setting emphasizing treble.
• “ Z-EHCR 3 ” (Z-Enhancer 3):
Setting emphasizing bass and
treble.
• “ Z-EHCR OFF ” (Z-Enhancer off):
Neither bass nor treble are em-
phasized by the Z-enhancer.
Note:
• Incapable of operation when connecting DSP
(DPH910) and DVD player (DVS9755z).
When the panel is closed:
Each time you press the [ Z-EHCR ] button of the
remote control unit, the tone effect changes in
the following order:
“Z-EHCR 1”
➜
“Z-EHCR 2”
➜
“Z-EHCR 3”
➜
“Z-EHCR OFF”
➜
“Z-EHCR 1”...
Note:
• When the panel is closed, operations can only be
made through the remote control unit.
When the panel is open:
1. Press the [ A-M ] button to change into the
AUDIO-MODE display.
2. Touch the [ Z-ENHANCER ] key when the AU-
DIO-MODE screen is being displayed to show
the Z-ENHANCER type selection screen.
3. When the Z-ENHANCER type selection
screen is displayed, touch the key for the de-
sirable type to select it.
• “ TYPE 1 ” (Z-Enhancer 1)
• “ TYPE 2 ” (Z-Enhancer 2)
• “ TYPE 3 ” (Z-Enhancer 3)
• “ OFF ” (Z-Enhancer off)
4. When the setting is finished, touch the [ RTN ]
key to return to the AUDIO-MODE screen.
Touch the [ RTN ] key on the AUDIO-MODE
screen to return to the STANDARD display.
∗
To return from the Z-ENHANCER type
selection display to the STANDARD display,
press the [
A-M ] button once again.
Adjusting the Z-enhancer
Notes:
• The Z-enhancer cannot be adjusted when it is
turned off.
• This function is enabled only when the panel is open.
1. Press the [ A-M ] button to change into the
AUDIO-MODE display.
2. Touch the [ Z-EHCR LV ] key when the AUDIO-
MODE screen is being displayed to show the
Z-ENHANCER level adjustment screen.
3. Touch the [
w
] or [
z
] key to adjust to the de-
sirable level.
∗
When type 1 is selected, you can adjust the
bass in the range of ±2.
∗
When type 2 is selected, you can adjust the
treble in the range of ±2.
∗
When type 3 is selected, you can adjust the
bass and treble in the range of ±2.
4. When adjustment is finished, touch the [ RTN ]
key on the Z-ENHANCER level adjustment