VRX835
33
English
Owner
’s
manual
1. Touch the [
SUB MODE
] key in the MENU
display, the [
PRESET SCAN
] key appears in
the display.
Touch the [
PRESET SCAN
] key to start pre-
set scan.
2. When the desired channel is received, touch
the [
PRESET SCAN
] key again.
∗
The same operation is also available by using
the [
SCN
] button in the panel.
Setting the TV diver
∗
This function is enabled only when the panel is
open.
∗
Normally use the TV diver with the “
ON
” position.
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press the [
ADJ
] button to switch to the ad-
justment selection display.
2. Touch the [
z
] key to select “
TV DIVER
”.
Touch the [
TV DIVER
] key to display [
ON
]
/
[
OFF
] key.
3. Touch the [
ON
]
key or [
OFF
] key to set the
selected reception setting.
●
ON:
Sets reception emphasizing the visual.
●
OFF:
Sets the diver setting to OFF.
4. Press the [
ADJ
] button to return to the previ-
ous mode.
Setting the TV area
∗
This function is enabled only when the panel is
open.
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the
[ADJ]
button to switch to the ad-
justment selection display.
2. Touch the
[
z
]
key to select “
TV AREA
”.
Touch the
[TV AREA]
key to display a list of
country name.
3. Touch the
[COUNTRY NAME]
key to select
a desired country.
4. When the setting is finished, touch the
[RTN]
key in the TV AREA selection display to
return to the STANDARD display.
∗
To return from the TV AREA select display to
the STANDARD display, press the
[ADJ]
button once again.
TV Operations
Always turning on the button
illumination on the operation panel
Notes:
• The following operation is enabled when the
panel is open.
• Doing this operation turns on and off the
illunination only for the buttons of VoL [
+
] and [
–
],
[
TILT
], and [
OPEN
].
The button illumination on the operation panel
when the display is turned upward, can be
switched between “
ON
” and “
OFF
”.
●
“OFF”:
Button illumination on the operation
panel turns on for 5 seconds;
●
“ON”:
Button illumination is always on when
the power is turned on;
1. When the panel is open, press the [
ADJ
] button
to show the adjustment selection display.
2. Touch the [
UPPER ILLUMI
] key to select
“
ON
” or “
OFF
”.
3. Touch the [
ON
] or [
OFF
] key for setting.
4. Press the [
ADJ
] button to return to the previ-
ous mode.
∗
To set “
ON
” again, switch “
OFF
” to “
ON
”
manually.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for Radio stations, TV
stations and CDs. The numbers of titles that can
be entered for each mode are as follows.
∗
You cannot enter titles with the unit in Seek, Pre-
set Scan, Auto store (TUNER, TV) mode. Cancel
each of those operations before entering titles.
1. Press the [
FUNC
] button to select the mode
you want to enter a title (TUNER, CD, CD
changer or TV).
2. Select and play a CD or a CD in the CD
changer or tune in to a Radio station or a TV
station for which you want to enter the title.
CD changer mode
CDC655z connected
CDZ625, CDC655Tz
connected
CDC1255z connected
Number of titles
60 titles
100 titles
50 titles
Mode
TUNER mode
TV mode
CD mode
Number of titles
30 titles
15 titles
50 titles
Other Functions
