PROFESSIONAL FIRMWARE VERSION
2013
4
1.3 Precautions
Protect the device from exposure to direct sunlight or bright light, this greatly affects
the fingerprint collection and leads to fingerprint verification failure. It is
recommended to use the device under a temperature of 0–50°C so as to achieve the
optimal performance. In the event of exposure of the device to the outdoors for long
periods of time, it is recommended to adopt sunshade and heat dissipation facilities
because excessively high or low temperature may slow down the device operation and
result in high false rejection rate (FRR). When installing the device, please connect the
power cable after connecting other cables. If the device does not operate properly, be
sure to shut down the power supply before performing necessary inspections. Note
that any live-line working may cause damage to the device and the device damage
arising out of live-line working falls beyond the scope of our normal warranty.
For matters that are not covered in this document, please refer to related materials
including the installation guide, access control software user manual.
Introduction of Device
2.1 Overview of Device Functions
As an integrated fingerprint & access control device, our product can be connected
with either an electronic lock or an access controller. This device features simple and
flexible operations and supports the use of administrators. The screen displays will
guide you through all the operations. It supports access control function for a security
management and supports multiple communication modes.
2.2 Important Safeguards
2.2.1 Installation Location
Do not install terminal in areas which are exposed to bright sunlight or rain, as
the fingerprint readers are not designed to work in those areas. Bright light will
interfere with reading of the sensor and fingerprint readers are not waterproof
or vandal proof. It is recommended to protect your fingerprint terminal with
enclosure.
