PROFESSIONAL FIRMWARE VERSION
2013
11
3.1.1 Network
When Ethernet is used for communication of device and PC, the following settings
need to be checked:
Device IP address: IP is 192.168.1.201 by default. You can modify it if it is necessary.
But it cannot be the same with that of PC. Subnet mask: It is 255.255.255.0 by default.
You can modify it if it is necessary.
Gateway address: It is 0.0.0.0 by default. If the device and PC are in different net
segment, it is necessary to set address. Net speed: Set the speed according to the LAN
where the device is.
3.1.2 Serial Port options
When RS232/RS485 is used for communication of device and PC, it is necessary to set
device ID. Device ID: 1—254. If RS232/RS485 is used, this ID needs to be input on the
software communication interface.
