Clarion DVS9755z, Installation Manual

Page: 7 / 22

DVS9755z
13
DVD Operations
The operations described in this chapter are per-
formed using the remote control buttons.
Replacing discs
1. Slide the door downwards until a clicking
sound is heard. The disc is now automatically
ejected.
• If the disc is left as is and not removed, it
will automatically be retracted into the unit
after 15 seconds.
2. Insert the DVD video disc in the slot with the
label side upwards. When the disc has been
inserted halfway, it is automatically pulled in-
side the unit.
• When an inserted DVD video disc is not to
be automatically played back, press the
[
] button.
• When playing back a double-sided DVD
video disc, insert the disc with the top side
up, play it back entirely. Then take out the
disc and turn it over to play the other side.
(The top and back side of a DVD video disc
are marked differently on different discs.)
• Dirt or dust on the data surface may gener-
ate read errors. Wipe the disc with a soft
cloth before insertion. If errors still occur,
remove the disc.
3. Close the door.
• Keep the door closed at all times to pre-
vent dust from entering the unit.
Note:
• Do not close the door before an ejected DVD video
disc has been removed. Should the door be closed
without first removing the DVD video disc, the disc
will not be ejected and may also be damaged.
Playing back discs
Press the [ ] button to start playback. Press-
ing the [ ] button again stops playback.
• When a menu is displayed, select the de-
sired item in step 2 of the following sec-
tion, “Selecting menus”.
Selecting menus
1. When the [MENU] button is pressed during
playback, the DVD video menu is displayed.
Main Menu
2. Press the top or bottom of the [JOG] button to
select an item and then press the center of
the [JOG] button.
Or, use the [10KEYS] buttons to select the
item and press the [SELECT] button.
Main Menu
• Note that some DVD video discs do not al-
low you to select items using the [10KEYS]
buttons.
• [JOG] button operations differ with the type
of menus used on the disc.
• Also the type of menus that are displayed
varies with the DVD video disc.
Stopping playback
Press the [ ] button to stop playback.
• Press the [ ] button to start playback
from the location where playback was pre-
viously stopped.
• When the [ ] button is pressed once again
after the disc has been stopped and the
[
] button is also pressed, the DVD
video disc is played back from the begin-
ning.
Remote control unit button operations