Clarion AUTOPC 310C Owner'S Manual Download Page 62

Page: 62 / 174

Clarion AutoPC Owner’s Manual

1. Do not warp or bend a CD.

2. A CD is vulnerable to heat, so do not leave it near a heater, in the

sun, or anywhere else where it will be exposed to heat.

3. Be careful not to scratch a CD.

4. Do not paste any labels on the disc surface or write anything on the

label surface (printed surface).

5. Do not increase the diameter of the center hole.

6. Do not wipe a CD with alcohol (particularly industrial methyl alcohol),

water, conventional record cleaner solution, static electricity
prevention agent, or similar liquids.

7. Keep fingerprints, oil, and dust off of a CD.

8. If the CD is dirty, wipe it with a soft cloth. Do not use a silicon cloth.

When wiping, always wipe from inside to outside.

9. Never force a CD into or out of the CD slot.

10. Insert a disc so that the playing side is down and the label side is up.

General cautions for

CD handling

Summary of Contents for AUTOPC 310C














































































































































































Search results

Summary of Contents for AUTOPC 310C

Reviews:

Related manuals for AUTOPC 310C

Brands by name

Popular brands

Clarion AUTOPC 310C, Owner'S Manual

Search results

Summary of Contents for AUTOPC 310C

Reviews:

Related manuals for AUTOPC 310C

Brands by name

Popular brands