Clarion AUTOPC 310C Owner'S Manual Download Page 22

Page: 22 / 174

Clarion AutoPC Owner’s Manual

General Operations

1. Press the POWER button

2. The display lights up immediately. The Auto PC remembers its last

operation mode and will automatically switch to display that mode.

3. To turn off the power to the unit, press the POWER button.

NOTE:

Use caution while operating the unit for long periods of time

without running the car’s engine. Draining the car’s battery will prevent
you from starting the car and may possibly shorten the life of the battery.

The clock is displayed when the ignition key is turned to the ACC
(accessory) or IGN (ignition on) positions, even if power to the unit is off.

In some cars, the clock display may momentarily disappear when the
ignition key is turned to the START (starter engage) position. The display
will reappear after the engine has started and the ignition key is released
to the IGN position.

Power on/off

Clock display

Summary of Contents for AUTOPC 310C














































































































































































Search results

Summary of Contents for AUTOPC 310C

Reviews:

Related manuals for AUTOPC 310C

Brands by name

Popular brands

Clarion AUTOPC 310C, Owner'S Manual

Search results

Summary of Contents for AUTOPC 310C

Reviews:

Related manuals for AUTOPC 310C

Brands by name

Popular brands