Clarion AUTOPC 310C Owner'S Manual Download Page 152

Page: 152 / 174

Clarion AutoPC Owner’s Manual

140

Using the CF Card for backup and restore

The Clarion AutoPC System will
accept CF Cards from most
manufacturers. Warning: the CF
Card can be inserted one way only.
Be sure to insert the CF Card with
the manufacturer’s label and arrow

FACING RIGHT

of the unit as

shown below.

1. Back up important data regularly.

2. Back up the data before having maintenance or upgrades done on the

system, including changing a Backup Battery.

3. Back up the data before changing the Coin Cell Battery.

4. Be sure that your customized files such as contacts and radio presets

are the way you want them to be before doing a back up.

5. Be sure to protect the CF Card insertion slot with the cover when the

slot is not being used.

Inserting the CF

Card

Additional

recommendations

Make sure label and
arrow are facing right

Summary of Contents for AUTOPC 310C














































































































































































Search results

Summary of Contents for AUTOPC 310C

Reviews:

Related manuals for AUTOPC 310C

Brands by name

Popular brands

Clarion AUTOPC 310C, Owner'S Manual

Search results

Summary of Contents for AUTOPC 310C

Reviews:

Related manuals for AUTOPC 310C

Brands by name

Popular brands