Clare Controls CM-MT4420-HD, User Manual

Page: 17 / 24

HDMI 4x4 Matrix Switcher User Guide 11
Status. Inquire all outputs statues one by one.
Save[Y]. Save the present operation to the preset command [Y],
ranges from 0 to 9.
Recall[Y]. Recall the preset command [Y].
Clear[Y]. Clear the preset command [Y].
PWON. Work in normal mode.
PWOFF. Enter into standby mode and cut off the power supply.
STANDBY. Enter into standby mode.
/%[Y]/[X]:[Z]. HDCP management command. [Y] is for input (value: I) or
output (value: O). [X] is the number of one port, if the value of
X is ALL (all ports). [Z] is for working status (value: 1 or 0).
Y=I & Z=1, means the input port is compliant with HDCP.
Y=O & Z=1, means output with HDCP.
Y=I & Z=0, means the input port is not compliant with HDCP.
Y=O & Z=0, means output without HDCP.
DigitAudioON[x]. Enable HDMI audio output of port x.
X=1, 2, 3, 4, enable this one port.
X=5, enable all the 4 ports.
DigitAudioOFF[x]. Disable HDMI audio output of port x.
X=1, 2, 3, 4, disable this one port.
X=5, disable all the 4 ports.
EDIDH[x]B[y]. Copy the EDID from output port [x] to input port [y].
If the EDID data is effective and the audio part supports not
only PCM mode, then force-set it to PCM mode. If the EDID
data is not effective, then set it as initialized EDID data.
EDIDPCM[x].
Set the audio part of input port [x] to PCM format in EDID
database.
EDIDG[x]. Get EDID data from the output and display the output port
number of X.
EDIDMInit. Recover the factory default EDID data.
EDIDM[X]B[Y].
Manually EDID switching. Copy the EDID data of output[X] to
the input[Y].
EDIDUpgrade[x]. Upgrade EDID data via the RS232 port
[X] is for input port, when the value of X is 5, it means to
upgrade to all input ports. When the switcher gets the
command, it will show a message to send EDID file (.bin file).
Operations will be canceled after 10 seconds. (Note 1)
Please cut off all connections of HDBaseT ports.