12
HDMI 4x4 Matrix Switcher User Guide
UpgradeIntEDID[x]. Select one type of EDID data and upgrade built-in EDID data.
Supports 4 types of EDID data:
1. 1080P, 2D, PCM2.0
2. 1080P, 2D, 5.1 (audio)
3. 1080P, 3D, PCM2.0
4. 1080P, 3D, 5.1 (audio)
[x] = 1, 2, 3 or 4
When the switcher gets the command, it will show a message
to send EDID file (.bin file). Operations will be canceled after
10 seconds.
EDID/[x]/[y].
Set the built-in EDID data of input port [x] to type [y].
The value of [y] is 1, 2, 3, and 4. The EDID data types are
same as mentioned above.
%0801.
Automatically HDCP management. If input is with HDCP, so
is output.
%0911.
Reset to factory default.
%9961.
Check the system locking status.
%9962.
Check the status while in standby mode.
%9971.
Check the connection status of the inputs.
%9972.
Check the connection status of the outputs.
%9973.
Check the HDCP status of the inputs.
%9974.
Check the HDCP status of the outputs.
%9975.
Check the switching status.
%9976.
Check the output resolution.
%9977.
Check the status of digital audio of output channels.
Notes
Disconnect all the twisted pairs before sending command EDIDUpgrade[X].
In above commands, the [ ] symbols are for easier reading and do not need to be
typed in the actual operation.
Remember to end the commands with the ending symbols “.” and
“;”.
Type the command carefully. It is case-sensitive.
Summary of Contents for CM-MT4420-HD
Page 1: ...2014 02 382 Rev 02 HDMI 4x4 Matrix Switcher User Guide Model CM MT4420 HD ...
Page 2: ......
Page 4: ......
Page 24: ......
