H.264MP-MegaPixels RTSP Streaming User’s Manual
51
[Device Recording Parameters]
Stream selection: set record stream for SD card, preferred stream and alternate stream are
selectable.
Record files packing interval: set packing intervals for each segment of record file when SD
card is recording.1 means files will be packed every 1 minute.
[Other Parameters]
IP Camera User’s Manual
20/31
Automatically delete old files when storage device gets full: when the storage capacity of SD
card is used up, the device will delete old files automatically. The way to delete old files: first
delete the files of the earliest date, if the space is still not enough, then delete the files of the
earliest date but one, then go on like this if necessary. If the record files are taken on the
current date, then first delete the files of the earliest hour. But files of the current hour cannot be
deleted, if the SD card gets full in one hour, the device will stop recording and snapping images.
After the one-hour session ends, system will delete the files of the hour and continue to record
and snap pictures.
Scan the disk when device starts: check storage device or not when IP camera starts.
Note:
1 Do not cut off the power of the device during formatting process.
2 ext2 file is used to format system by default.
After setting all the parameters, click
[save]
to make the parameters valid.
CAUTION:
Never hot-swap SD card that may damage the SD card, valuable recording
stored in SD card will be lost!!
