H.264MP-MegaPixels RTSP Streaming User’s Manual
17
Click
“
Search Camera
”
on Utility CD auto-play menu*, will find all the
Clairvoyant
IP cameras in
your local network.
* To use SearchNVS software to search and modify network parameters (IP address, Subnet
mask, Gateway etc.).
NOTE:
A: Find the SearchNVS.exe in
【
tool software
】
folder of Utility CD and copy it to PC.
B: Install the Central Management software first, follow below steps to find the SearchNVS:
【
Start
】
---
【
all programs
】
---
【
NVSCenter6.16
】
---
【
Search NVS
】
.
The factory default settings of the IP Camera are as follows
IP:
192.168.55.160
; Subnet mask:
255.255.255.0
User name:
admin
; Password:
admin
Run the SearchNVS software to search and modify IP Camera network parameters.
SearchNVS use multicast protocol to find
Clairvoyant
IP cameras; most firewalls forbid the
multicast data packets. So please close the firewall first or enable/ allow SearchNVS to use
multicast protocol.
Click on
【
Search
】
button to start search IP Cameras as illustrated below:
【
Local IP
】
Display the local PC IP. If your PC has multiple NICs or multi-addressed local IP,
please select an IP address to connect NVS.
In the above Search NVS software interface, it shows this computer has searched all IP
Cameras in LAN. If there are many IP cameras in your LAN, you can distinguish which
camera is yours by the Device Name based on the unique device ID. The Device Name
was named in the factory as “DVS+ID number”.
Note:
Please make sure there is DHCP server available, or set your PC IP address
manually.
Your PC won’t “
Obtain an IP address automatically
” without DHCP connected.
SearchNVS won’t work on a PC without IP address.
Please select the correct Network Interface Card (that connected to cameras) IP address
for “
Local IP
” if you have multiple Network Interface Cards installed in your PC.
Set IP address for IP camera.
Your computer IP address must
be
“
in the same subnet
”
of IP Camera in order to visit
IP camera.
So we need to set the IP address of the IP camera before accessing
camera.
To get your PC IP configuration information:
go to command mode by
click
【
Start
】
【
Run
】
”, then input “
command
” or “
cmd
”(Windows 2000/XP system).click “
ok
”:
