H.264MP-MegaPixels RTSP Streaming User’s Manual
39
【
Audio
】
Set audio ON/OFF
（
Default: OFF
）
,there are two models: Microphone and Line
input. If users don’t need audio status; please close audio input to save the DSP
resource and network resource.
【
Mask Area Set
】
Mask all image or Mask part image, the whole image divided into 22 * 18
blocks. Select the blocks to mask, or cancel the mask setting.
6.6 Motion Alarm Setting
Setting motion alarm parameters: included the schedule time, on/ off the alarm, sensitivity,
trigger alarm output, alarm delay, alarm recording on PC storage or capture snapshot to SD
card when alarming. (The snapshots stored on SD card can be downloaded to PC on
【
replay
】
page)
【
Schedule
】
Set the time of motion alarm detection.
【
Alarm output
】
Alarming, trigger alarm signal output.
【
Alarm output duration
】
Alarming, delay the alarm (the period of time after alarm that
continuous alarms will be ignored) automatically ,set the time from 0~86400
seconds.
