H.264MP-MegaPixels RTSP Streaming User’s Manual
49
6.11 RS-485 Settings
When PAN/TILT camera mount connect to RS485 port, Correct Address, Protocol, Baud rate,
Date bit, Stop bit, Parity Check, Flow Control must be set.
Download the corresponding protocol for the decoder.
[Serial port settings]
: When IP camera is connected to RS485 (or RS232) communication or
control device (e.g. PAN/TILT camera mount), the parameters of RS485 (or RS232) need to
be set according to the settings of the communication control device (address, protocol,
baud rate), and the corresponding protocol need to be downloaded.
Note:
Only when the parameters and protocol are correctly set that the control of add-on
communication control device can be implemented.
[PTZ decoder protocol]
Decoder address: 1~255.
Built-in protocol: echo the built-in protocol name of current IP camera.
PTZ decoder protocol file uploading: to upload the decoder/dome camera communication
protocol selected by users. The system supports hundreds of decoder/dome camera
communication protocols; it can also be defined by users according to the standard format of
protocols.
C1228H PTZ address: 1
Baudrate : 2400bps
Data bits
: 8
Stop bits
: 1
Check type
: none
Flow ctrl
: none
click
【
save
】
after setting.
