![clage Zip Hydroboil Plus 3 Operating And Installation Instructions Download Page 25](http://html1.mh-extra.com/html/clage/zip-hydroboil-plus-3/zip-hydroboil-plus-3_operating-and-installation-instructions_2612035025.webp)
25
CLAGE
EN
5. Operation
Key-Icons
Move to the previous item
Move to the next item
Move to sub menu of selected item
Move to the previous menu
Perform one of 3 functions:
1. Move to sub menu of selected item
2. Select the currently highlighted item to adjust it
3. Confirm the value of a selected item
Increment the item selected by one step
Decrement the item selected by one step
Key 1
Icon 1
Icon 3
Icon 2
Icon 4
Key 2
Key 3
Key 4
Main menu
Press key 1 to enter the main menu. Using the sensor keys, you can select various
functions and call up submenus. Depending on the course of the operating steps, the
symbols for navigation in the main menu on the sensor keys change. If no symbol is
displayed, the key has no function.
Settings
Service
Info
Install
Date & Time
Filter
Energy modes
Temperature
EXTERNAL FILTER
Filter log
Replace Filter
Life / Usage
60 DAYS REMAINING
30
Filter Life (Month)
3
Settings
Date & Time:
Set the date and time. Timecontrolled energy saving modes will not
work without a correct time.
Temperature
: Enter a value between 68 – 100 °C.
Note: Setting to 100 °C may affect the flow rate.
Energy modes
: Various energy saving modes can be selected and activated here. For
details, see the section “Energy Saving”.
Filter
: If an external filter is used, the service life of the filter can entered here in 1 14
months. The service life is calculated from the filter capacity and the tap volume per
day. If used filters are used, the elapsed operating time can also be entered in 15 day
increments.
The filter log shows the days on which the filter operating time counter was reset and
the remaining filter service life in days.
Note: To ensure a constant water quality, it is recommended to replace the filter
every 12 months.
New filters must always be rinsed before first use. To flush the filter connect it to the
angle valve and release the water outlet of the filter into a bucket or drain. Rinse the
filter for about three minutes.
Observe to reset the usage time counter.
Language
: Select your preferred menu language. The appliance is factory set on
English.
Filter usage (Days)
Display