background image

DSX SERVOTRONIC MPS

®

4

2. Safety instructions 

Please read these instructions carefully before installing or using 
the appliance! Keep the instructions handy with the appliance for 
future use!

Instruction manuals are intended for the specialist who is responsible 
for the installation of the appliance. Operation manuals are for the end 
user. The provided manuals correspond to the technical specifications 
of the appliance.
The latest version of the instructions can be found online at www.clage.
com.

•  Do not use the appliance until it has been correctly 

installed and unless it is in perfect working order. 

•  Do not remove the front cover under any circumstances 

before switching off the mains electrical supply to the 
unit. 

•  Never make technical modifications, either to the appli­

ance itself or the electrical leads and water pipes. 

•  The appliance must be earthed at all times. 
•  Pay attention to the fact that water temperatures in 

excess of approx. 43 °C are perceived as hot, especially 
by children, and may cause a feeling of burning. Please 
note that the fittings and taps may be very hot when 
the appliance has been in use for some time. 

•  The appliance is only suitable for domestic use and 

similar applications inside closed rooms, and must only 
be used to heat incoming water from the mains supply. 

•  The appliance must never be exposed to frost. 
•  The values stated on the rating plate must be observed.
•  In case of malfunction, disconnect the fuses imme­

diately. In case of leaks, cut off the mains water sup­
ply instantly. Repairs must only be carried out by the 
customer service department or an authorised profes­
sional. 

•  This appliance can be used by children aged 8 years 

and above and persons with reduced physical, sen­
sory or mental capabilities or lack of experience and 
knowledge if they have been given supervision or ins­
truction concerning use of the appliance in a safe way 
and understand the hazards involved. Children shall 
not play with the appliance. Cleaning and user main­
tenance shall not be performed by children without 
supervision.

2. Инструкции по технике безопасности 

Перед монтажом и первым включением прибора внимательно 
прочтите данные инструкции. Храните инструкции так, чтобы 
всегда иметь их под рукой.

Инструкции по монтажу предназначены для специалиста, 
выполняющего монтаж прибора. Инструкции по эксплуатации 
предназначены для конечного пользователя. 
Инструкции в последней редакции можно найти на сайте  
www.clage­russia.ru или www.clage.com.

•  Эксплуатация прибора запрещена, если он не 

смонтирован надлежащим образом или не 
находится в исправном рабочем состоянии. 

•  Перед снятием лицевой панели прибора отключите 

его от электросети. 

•  Запрещается вносить технические изменения как 

в сам прибор, так и в элементы электропитания и 
водоснабжения. 

•  Прибор должен быть постоянно заземлен. 
•  Обратите внимание: вода, температура которой 

превышает 43 °C, воспринимается как горячая 
(особенно детьми) и может вызвать болевые 
ощущения. Осторожно: через некоторое время 
после начала работы прибора арматура и краны 
могут сильно нагреться. 

•  Прибор является бытовым и должен использоваться 

исключительно для нагрева водопроводной воды. 

•  Эксплуатация прибора при минусовых 

температурах в помещении запрещена. 

•  Необходимо соблюдать параметры, указанные на 

табличке с паспортными данными прибора.

•  В случае возникновения проблем в работе прибора 

незамедлительно отключите его от электросети. 
В случае протечки незамедлительно перекройте 
подачу воды. Ремонтные работы должны 
осуществляться исключительно специалистом 
сервисной службы. 

•  Детям старше семи лет и лицам с ограниченными 

физическими, сенсорными или умственными 
способностями или недостаточным опытом и 
знаниями пользоваться прибором можно только 
под присмотром или после инструктажа по 
безопасной эксплуатации прибора, когда нет 
сомнений в том, что они осознают опасности, 
связанные с работой прибора. Дети не должны 
играть с прибором. Детям чистить и ухаживать за 
прибором можно только под присмотром взрослых.

Summary of Contents for DSX SERVOTRONIC MPS

























Reviews: