Claas LEXION 7000, Information And Basic Field Settings

Page: 51 / 62

To set throughput with monitoring,
drive the combine into the standing
crop so that the loss monitors are full
to the white line. Then check that this
is what you accept as a loss.
During unloading, the CRUISE PILOT
automatically changes to unload mode
which gives a constant speed, this
will can be up to 15% less than the
current forward speed. The unload
mode can be turned off in CEBIS.
TIP:
Use the QR code on the back of the
booklet to get the video for setting up
CEBIS in the field.
EASY: CRUISE PILOT
50