Claas LEXION 7000, Information And Basic Field Settings

Page: 39 / 62

38
The preparation pan (1) is the first part
of the cleaning system that the grain
will come into contact with. Its function
is to separate the grain and the chaff.
The grain is heavier and therefore goes
to the bottom, the lighter chaff goes to
the top.
It is important that this is kept clean,
to allow this to happen effectively. A
dirty preparation pan will cause a poor
sample and reduce output.
TIPS: Clean the preparation trays
daily, this will help keeping a clean
sample.
When removing the prep trays for
cleaning, blow off the top of the
gear box area to remove any chaff
and dust.
Depending on the machine there
can be 2 sets or 4 sets of Rotor
cover plates.
These are opened or closed
in CEBIS or on the armrest.
AUTOSLOPE and 4D are
activated in CEBIS.
38
Settings: Cleaning