Claas LEXION 7000, Information And Basic Field Settings

Page: 37 / 62

Settings: Threshing
To obtain initial settings, it is recommended that the
‘CLAAS settings’ are loaded through CEBIS and these
are to only be used as a starting point, then adjustments
should be made from there.
The prime objective here
is to remove the maximum
amount of grain with
minimum damage to grain
and straw. Over-threshing
can crack grains, produce
more chaff and use more
power. It is imperative for the
performance of the machine
that the concaves are kept
clean. Generally, wider
concave gaps are accepted
when using a LEXION.
Only make one adjustment at a time.
Only do just enough threshing, over threshing
causes overloading of the sieves and uses
power unnecessarily.
It is recommended that the drum speed is
adjusted by 100rpm at a time.
Tips:
36