Claas K5D00100, Repair Manual

Page: 83 / 252

3.10 TRANSMISSION
For a given gear selection the APC powershift
controller will select the following gears:
The speed limit for 6/3 gearbox models is 40 km/hr
The speed limit for 5/3 gearbox models is 25 km/hr
The speed limit for 4/2 gearbox models is 20 km/hr
APC display
A Display
M Mode selector
T Indicator (LED type):
On - When mode selector M is pressed
once. Machine speed is displayed as
turbine or input speed.
Off - When mode selector M is pressed
twice and the machine is in motion.
Machine speed is displayed as Km/hr.
On - When mode selector M has been
pressed twice, but machine is not in motion.
On - When mode selector M has been
pressed twice, the machine is in motion, but
there is no output from the speed sensor.
F Indicator (LED type), which indicates an APC
fault.
APC gear selector module
n o i t i s o p r e v e L d e t c e l e s r a e G
) x o b r a e g 3 / 6 (
d e t c e l e s r a e G
) x o b r a e g 3 / 5 (
d e t c e l e s r a e G
) x o b r a e g 2 / 4 (
6 F 6 _ _
5 F 5 5 _
4 F 4 4 4
3 F 3 3 3
2 F 2 2 2
1 F 1 1 1
N _ _ _
1 R 1 1 1
2 R 3 3 3
3 R 3 3 3
4 R 3 3 3
5 R 5 5 _
6 R 5 _ _