Safety Precautions
Always read this section before use.
When designing and manufacturing a device using CKD products, the manufacturer is obligated to check that device safety
mechanism, pneumatic control circuit, or water control circuit and the system operated by electrical control that controls the
devices is secured.
It is important to select, use, handle and maintain the product appropriately to ensure that the CKD product is used safely.
Observe warnings and precautions to ensure device safety.
Check that device safety is ensured, and manufacture a safe device.
1
This product is designed and manufactured as a general industrial machine part.
It must be handled by an operator having sufficient knowledge and experience in handling.
2
Use this product in accordance with specifications.
This product must be used within its stated specifications. In addition, never modify or additionally machine this product.
This product is intended for use in general industrial machinery equipment or parts. It is not intended for use outdoors (except
for products with outdoor specifications) or for use under the following conditions or environments.
(Note that this product can be used when CKD is consulted prior to its usage and the customer consents to CKD product
specifications. The customer should provide safety measures to avoid danger in the event of problems.)
Use for applications requiring safety, including nuclear energy, railways, aircraft, marine vessels, vehicles, medical devices,
devices or applications in contact with beverages or foodstuffs, amusement devices, emergency cutoff circuits, press
machines, brake circuits, or safety devices or applications.
Use for applications where life or assets could be significantly affected, and special safety measures are required.
3
Observe organization standards and regulations, etc. related to the safety of device design and control, etc.
ISO4414, JIS B 8370 (General rules for pneumatic systems)
JFPS2008 (Principles for pneumatic cylinder selection and use)
Including High Pressure Gas Safety Act, Industrial Safety and Health Act, other safety rules, body standards and regulations, etc.
4
Do not handle, pipe, or remove devices before confirming safety.
Inspect and service the machine and devices after confirming safety of all systems related to this product.
Note that there may be hot or charged sections even after operation is stopped.
When inspecting or servicing the device, turn OFF the energy source (air supply or water supply), and turn OFF power to the facility.
Discharge any compressed air from the system, and pay attention to possible water leakage and leakage of electricity.
When starting or restarting a machine or device that incorporates pneumatic components, make sure that the system safety, such as
pop-out prevention measures, is secured.
5
Observe warnings and cautions in the following pages to prevent accidents.
WARNING
The precautions are ranked as "DANGER", "WARN
ING" and "CAUTION" in this section.
DANGER:
When a dangerous situation may occur if handling is mistaken leading to fatal or serious injuries, and
when there is a high degree of emergency to a warning.
WARNING:
If handled incorrectly, a dangerous situation may occur, resulting in death or serious injury.
CAUTION:
When a dangerous situation may occur if handling is mistaken leading to minor injuries or physical
damage.
Note that some items described as "CAUTION" may lead to serious results depending on the situation.
Every item provides important information and must be observed.
Limited warranty and disclaimer
1
Warranty period
This warranty shall be valid for one year after delivery to the customer's designated site.
2
Scope of warranty
If any faults, found to be the responsibility of CKD, occur during the above warranty term, the product shall be replaced, the
required replacement parts provided free of charge, or shall be repaired at the CKD factory free of charge.
This Limited Warranty will not apply to:
(1) Failures due to use outside the conditions and environments set forth in the catalog or these specifications.
(2) Failures resulting from factors other than this product.
(3) Failures caused by improper use of the product.
(4) Failures resulting from modifications or repairs made without CKD consent.
(5) Failures caused by matters that could not be predicted with the technologies in practice when the product was delivered.
(6) Failures resulting from natural disasters or accidents for which CKD is not liable.
The warranty covers the actually delivered product, and does not cover any damage resulting from losses induced by faults in
the delivered product.
3
Compatibility check
The customer is responsible for confirming the compatibility of CKD products with the customer's systems, machines and
equipment.
17
Summary of Contents for FCM-0001 AI
Page 29: ...ME M O MEMO 24 ...
