CK Light 192CH DMX CONTROLLER II, User Manual

Page: 12 / 16

All LEDs will flash three time indicating the new step has been inserted into the
chase.
� � � �
Deleting Deleting Deleting Deleting A A A A Step Step Step Step
1) Enable Programming Mode.
2) Select the chase that contains the step you wish to delete.
3) Press the Tap/Display button, the LCD shows the current step.
4) Press the Bank Up/Down button and scroll to the step you wish to delect.
5) Press the Auto/Del button to delete the step. All LEDs will flash three times
indicating the requested operation has been performed.
� � � �
Delete Delete Delete Delete A A A A Chase Chase Chase Chase
1) Press the button corresponding to the chase you wish to delete.
2) Press and hold down the Auto/Del button while holding down the chase button. All
LEDs will flash three time indicating that the requested operation has been
performed.
� � � �
Delete Delete Delete Delete A A A A Chase Chase Chase Chase
1) With the power off, press and hold down the Auto/Del and Bank Down buttons at the
same time.
2) Reapply the power, and all chases should be cleared.
JOYSTICK/CHANNEL
JOYSTICK/CHANNEL JOYSTICK/CHANNEL
JOYSTICK/CHANNEL SELECTION
SELECTION SELECTION
SELECTION
�
�
� �
Set-up
Set-up Set-up
Set-up Joystick
Joystick Joystick
Joystick
1) Press and hold the “Program” button until LED is lit.
2) Press and hold the “Mode” and “Fine” buttons at the same time, the assign LED
should light. If the reverse LED lights, press “Fine” and “Mode” again to enter assign
mode.
3) Use the bank Up and Down keys to select the axis you wish to assign (Pan or Tilt).
4) Use the “Tap/Display” button to select 16 or 8 channel mode.
5) Press the button corresponding to the scanner you wish to assign.
6) While holding the mode button press the scene number corresponding to the slider