![background image](http://html1.mh-extra.com/html/cityev/evline-100/evline-100_documentation_2611487004.webp)
Page 4
After 20 seconds middle LED indicates maximum charge current
Middle LED flashes in groups to indicate Maximum Charging current:
1 flash = 16A
- - - -
2 flashes = 32A
- - - - - - - -
5.
Press start/stop switch to change mode
After 20 seconds bottom LED indicates communications mode
Bottom LED flashes in groups to indicate communications mode:
1 flash = No Communications
- - - -
2 flashes = Back office communications enabled
- - - - - - - -
6.
Press start/stop switch to change mode
After 20 seconds the display cycle will begin again with the top LED
7.
Swipe key fob to exit programming mode.
8.
Charge point will restart
Keyfob Programming: