Page 13 of 27
Advanced Settings
Setting a SHoW Key
If two City Theatrical systems are set up near each other, such as in adjacent theatres, it is
possible that if those two systems are set on the same SHoW ID one system could inadvertently
control the other. SHoW Key is an optional three-digit adjunct to the SHoW ID that locks down
your system from any outside control. SHoW Key is set on the main Transmitter screen, and on
the Manufacturer Settings screen of the Multiverse Node or SHoW Baby. Range is 0-500, default
is 0 (off).
Figure 7: Setting a SHoW Key with DMXcat
Other Advanced Transmitter Settings
By tapping the RDM symbol on the Transmitt
er’s main menu (shown above), then tapping:
-Sub Devices
-RDM for either Sub Device 1 or Sub Device 2 (the two radios)
-Manuf. Settings
The Device Details menu is shown. This is where you can make several additional advanced
settings.
•
Output Power
The output power can be changed from Max (default) to three other reduced settings.
Reducing output power can reduce your radio footprint and improve fidelity by
reducing reflections.
Tap the RDM symbol to
access the Transmitter’s
RDM menu.
