manualshive.com logo in svg

CITROEN 2005 C1, User Manual

Share
Download
CITROEN 2005 C1 User Manual Download Page 33

27

ENGINE

B1B2021D

PRESENTATION OF ENGINE 384 F ( CFA)

Engine : CFA

Cylinder head gasket

A-A

: transversal section.

(3)

: shim.

The cylinder head gasket used is in laminated steel.
The gasket surface is coated with

NBR

in order to make the cylinder head more air-tight.

NOTE : NBR (Nitrile Butadiene Rubber) 

: rubber material known for its resistance to heat, oil and

wear.

Cylinder head

The sparking plugs are placed at the centre of the combustion chambers so as to make the engine
less subject to knock.
The angle formed between the inlet valves and the exhaust valves is more closed. It has been fixed
at 

33.5° "h"

to permit a cylinder head of a more compact construction.

The combustion chambers are double wedge-shaped 

"k"

.

The shape of the inlet ducts has been optimised for improved combustion.
The cylinder head is fixed with extended tension bolts.
The extension of the coolant channels 

"j"

into the cylinder head has been optimised for better

cooling.

B1B2020D

FR-C1-page022-92-2005  9/01/06  8:48  Page 27

Summary of Contents for 2005 C1






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands