130
CLUTCH
GEARBOX
TRANSMISSION
CHECKING AND ADJUSTING THE CLUTCH PEDAL TRAVEL
Turn the clutch adjustment nut
"b"
until you obtain the correct play
B
in the pedal.
After adjusting the play
B
in the pedal, check the height
A
of the pedal.
Tighten the parking brake lever and fit a wheel chock.
Start the engine and let it run at idle.
Without pressing the clutch pedal, bring the gear lever slowly into reverse gear until the gearing meets a
resistance from the clutch.
Progressively press on the clutch pedal and measure the travel from the point where the gear noise disappears
(point of release
"c"
) to the position of maximum travel
"d"
.
25 mm
or more (from the position of maximum travel
"d"
to the point of release
"c"
If the travel is not correct, proceed to the following operations:
Check the height
A
of the pedal
Check the play
B
in the pedal
Check the clutch mechanism and disc
Check the travel
C
of the pedal
Travel
C
of the pedal
:
148 mm.
B2B2002D
B2B2003D
FR-C1-page126-148-2005 9/01/06 8:53 Page 130
