manualshive.com logo in svg

CITROEN 2005 C1, User Manual

Share
Download
CITROEN 2005 C1 User Manual Download Page 2

PRIVATE CARS

CITROËN C1

PRIV

A

TE CARS

CAR 000 022

2005

AC/QCAV/MTD
Méthodes techniques documentation

쏘

«The intellectual property rights relating to the technical information contained in this document belong

exclusively to the manufacturer. Reproduction, translation or distribution in whole or in part without prior
written authorisation from the manufacturer is forbidden».

«The technical information contained in this document is intended for the exclusive use of the trained personnel
of the motor vehicle repair trade. In some instances, this information could concern the security and safety of
the vehicle. The information is to be used by the professional vehicle repairers for whom it is intended and they
alone would assume full responsibility to the exclusion of that of the manufacturer».
«The technical information appearing in this brochure is subject to updating as the characteristics of each
model in the range evolve. Motor vehicle repairers are invited to contact the CITROËN network periodically for
further information and to obtain any possible updates».

2005

COUV-C1-2005  9/01/06  8:41  Page 2

Summary of Contents for 2005 C1






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands