Citrix ADC MPX 5550, Manual

Page: 50 / 218

Citrix ADC MPX
The following components are visible on the back panel of the MPX 11515/11520/11530/11540/11542
appliance:
• 256 GB or larger removable solid-state drive.
Note: Drive densities might increase as components become EOL but its size is never smaller
than the original.
• USB port (reserved for a future release).
• Power switch, which turns off power to the appliance, as if you were to unplug the power supply.
Press the switch for five seconds to shut off the power.
• Non-maskable interrupt (NMI) Button that is used at the request of Technical Support and pro-
duces a core dump on the appliance. Use a pen, pencil, or other pointed object to press this red
button, which is recessed to prevent unintentional activation.
• Two removable hard-disk drives that are used to store user data.
• Disable alarm button . This button is functional only when the appliance has two power sup-
plies.
Press this button to stop the power alarm from sounding when either of the following conditions
is true:
– You have plugged the appliance into only one power outlet.
– One power supply is malfunctioning, and you want to continue operating the appliance
until it is repaired.
• Two power supplies, each rated at 960 watts, 110–220 volts. Maximum power consumption is
650 watts and typical power consumption is 500 watts, except on the MPX 11540T appliance
which has a maximum power consumption of 365 watts and typical power consumption of 300
watts.
For information about installing the rails, rack mounting the hardware, and connecting the cables,
see “
Installing the Hardware .”
For information about performing initial configuration of your appliance, see “ Initial Configuration .
Citrix ADC MPX 14000
September 19, 2022
The Citrix ADC MPX 14020/14030/14040/14060/14080/14100 are 2U appliances. Each model has two
6-core processors and 64 GB of memory and sixteen 10G SFP+ ports (16x10G SFP+).
© 1999 ‒ 2022 Citrix Systems, Inc. All rights reserved. 50