Citrix ADC MPX 5550, Manual

Page: 105 / 218

Citrix ADC MPX
• One 300 GB removable solid-state drive on the T1300-10GE appliance and two 300 GB remov-
able solid-state drives on the T1300-40GE appliance.
Note: Drive densities might increase as components become EOL but its size is smaller than the
original.
• Power switch, which turns power to the appliance on or off. Press the switch for less than two
seconds to shut off the power.
• Two power supplies, each rated at 1000 watts, 100–240 volts.
• **Disable alarm button **, which is functional only when the appliance has two power supplies.
Press this button to stop the power alarm from sounding when one of the following conditions
is true:
• You have plugged the appliance into only one power outlet.
• One power supply is malfunctioning, and you want to continue operating the appliance until it
is repaired.
For information about installing the rails, rack mounting the hardware, and connecting the cables,
see
Installing the Hardware .
For information about performing the initial configuration of your appliance, see Initial Configuration .
Citrix ADC T1310
August 19, 2020
The Citrix ADC T1310 is a 2U appliance. It has two 10-core processors and 256 GB memory. The T1310
appliance is available in the eight 40G QSFP+ ports (8x40G QSFP+) configuration.
Note: The T1310 appliance is not a RAID device.
The following figure shows the front panel of the T1310 appliance.
Figure 1. Citrix ADC T1310 front panel
© 1999 ‒ 2022 Citrix Systems, Inc. All rights reserved. 105