2 Preparation
18
2-3. Using the Panel Button
The panel button on the operation panel is used to operate the IF1-WF01.
Starting the Wireless LAN Interface Board
Turn on the printer. The IF1-WF01 starts working approximately 20 seconds after the printer turns on.
Printing the Wireless LAN Interface Board Configuration
Press the panel button. See 2-5, Printing the Wireless LAN Interface Board Configuration (page 21)
for details.
Switching to Setting Mode
Press and hold the panel button. The buzzer
*
will sound once, signaling a switch to setting mode.
・
Setting mode enables the reading of the factory default settings.
・
If there is no activity for three seconds in the setting mode, the buzzer
*
will sound once, signaling a
return to normal mode.
* Note that the buzzer will not sound if the IF1-WF01 is connected to the CL-S400DT (Z) printer. In
addition, the buzzer will not sound when the IF1-WF01 is used with the CT-S801 and CT-S601
series if the buzzer has been set to not sound.
Restoring to the Factory Default Settings
Switch to setting mode, then press and hold the panel button. The IF1-WF01 will return to the factory
default settings.
When the operation is complete, the IF1-WF01 will restart automatically.
The settings are cleared so the wireless LAN must be configured again.
Warning
