2 Preparation
24
2-7. Setting the Wireless LAN
2-7-1. Settings
Classification
Item
Description
General tab
WLAN board
Information
WLAN board
Name
Set the ID of the IF1-WF01.
Net Printer (factory default)
TCP/IP
Select the IP address acquisition method.
“Obtain an IP Address Automatically” (factory default)
“Use the following IP Address”
IP Address
Set the IP address for a static address.
192.168.10.100 (factory default)
Subnet Mask
Set the subnet mask for a static address.
255.255.255.0 (factory default)
TCP/IP
Default
Gateway
Set the default gateway for a static address.
192.168.10.100 (factory default)
UPnP Setting
UPnP
Set the UPnP setting.
Enable (factory default)
Disable
Raw Port
Number
Set the TCP port number for raw protocol printing.
9100 (factory default)
Timeout for
print data
Set the timeout duration of connection to the host. 0 to 65535
(seconds). When the setting is “0”, there is no timeout.
180 (factory default).
Print Setting
Action at
Timeout
Set the action when a timeout occurs with the host and other
connections are open.
Close all connections (factory default)
Move to next connection
Wireless LAN tab
Network Type Set the access mode.
Infrastructure (factory default)
Ad Hoc
Basic
SSID
Set the SSID of the connection access point.
CITIZENSYSTEMS (factory default)
