All Reset and Formatting Flash Memory
1. All Reset
This function is used to return the time, date and all other watch settings to their initial
(default) settings. Perform this all reset procedure in the following cases.
• There is an error in the watch display
• When charging the watch after it has stopped completely as a result of being
insufficiently charged
Even if the all reset procedure is performed, location settings (displayed locations, names
of locations), diving logs, daily graphics and anniversary graphics that have been set by
the user in the PC remain without being deleted. However, it should be noted that only
diving data acquired prior to performing the all reset procedure on the day the all reset
procedure is performed may be deleted.
Procedure
(1) Simultaneously press and then simultaneously release
buttons (A), (B), (C) and (D).
• All of the display elements on the watch are displayed after
an alarm sounds and "INITIALIZE" is displayed.
(2) Press any of the buttons while all the display elements
are displayed.
• The watch displays the time mode of the standard mode
after "LOADING" is displayed.
This completes the all reset procedure. Correctly reset the time and date as well as other
modes after performing the all reset procedure.
* When the All-Reset procedure is performed, <Current Log Counter in watch (Total number of
Dives)> is reset to zero. If you want to continue counting from the previous log number, re-enter
the previous log number for <Your Current Log Number> with the CAPgm software provided.
* Although an alarm sounds every second while all of the display elements of the watch are
displayed, this is not a malfunction.
* If all of the display elements are not displayed after performing step (1) of the procedure (such as
when the alarm continues to sound without the display changing), repeat step (1) of the procedure.
* The watch automatically returns to the time mode of the standard mode if none of the buttons are
pressed for about 2 minutes while all of the display elements are displayed after performing step (1)
of the procedure. The all reset procedure is completed in this case as well.
2. Formatting Flash Memory
The following data recorded in the watch's flash memory is deleted when the flash
memory is formatted.
• Location settings made on the PC (displayed locations, names of locations)
• Scuba diving and skin diving logs
• Daily and anniversary graphics
64
(
C
)
(
B
)
(
D
)
(
A
)
(
C
)
(
B
)
(
D
)
(
A
)
