B. Infrared Communication Mode Operating Procedure
The procedure for data transfer by infrared communication is performed with the watch.
(1) The watch enters the infrared communication mode initial display when button (D) is
pressed for at least 2 seconds in any mode.
(2) The menu changes each time button (C) is pressed, and
the sub-menu of the selected menu is displayed when
either button (B) or the EL light button is pressed. (The
menu indicated with an the
*
mark is the selected
menu.)
(3) The selected communication menu is activated when
button (B) or the EL light button is pressed when the
lowermost sub-menu is displayed.
* Pressing button (A) when any menu is displayed returns the display to the previous menu.
* The watch returns to the time mode of the standard mode when button (A) is pressed during
the initial infrared communication display.
* The watch can be immediately returned to the time mode of the standard mode by pressing
button (D) for at least 2 seconds when any menu is displayed.
* The display automatically returns to the previous menu when none of the buttons are pressed
for about 1 minute during the display of any menu (or for about 3 minutes during transfer of
time data).
* The watch automatically returns to the time mode of the standard mode when none of the
buttons are pressed for about 1 minute during the initial infrared communication display.
Infrared Communication Menus
TIME/ALM (transfer of time or alarm data between watches)
Receive (data reception)
DATA WAITING (data reception
standby display)
SendTIME (transmission of time data)
SendALM (transmission of alarm data)
toPC (data transfer between the watch and a PC)
Data transfer standby display
toWATCH (transfer of dive alarm settings and anniversary data between watches)
DiveALM (transmission of dive alarms)
Transmission display
Annivers (transmission of anniversary data)
Transmission display
WaitDATA (data reception from watch)
Data reception standby display
53
(
C
)
(
B
)
(
D
)
(
A
)
(
C
)
(
B
)
(
D
)
(
A
)
EL light button
