— 54 —
The situation during various errors is shown below.
The LCD’s top line is the type of error, the bottom line is the remedy. Scroll
through messages that are longer than 16 characters.
Notes:
*1: LED may light while macro is executing.
*2: Buzzer sounds when MSW5-1 (buzzer setting) is set to ON. Note, however, that some combinations of
settings of MSW5-1 and MSW10-6 may change the condition in which buzzer sounds.
Status
Message
LED
Backlight
Buzzer
*2
Paper near-end
PAPER LOW
Orange
—
No
Paper-end
Paper end
Please replace paper roll.
Red
Red
Yes
Front cover open
Front cover open
Please close front cover.
Red
—
Yes
Paper cover open
Paper cover open
Please close paper cover.
Red
—
Yes
Cutter locked
Cutter lock
Open paper cover & remove jam.
Red
Red
Yes
Print head hot
Head overheat
Please wait, will continue
Orange
—
No
Memory error
—
Red
—
No
System error
System error
Please contact your dealer
Red
Red
No
Low-voltage error
L Voltage Error
Please contact your dealer
Red
Red
No
High-voltage error
H Voltage Error
Please contact your dealer
Red
Red
No
Black mark label error
BM/Label Error
Please check paper/calibration.
Red
Red
Yes
Sensor calibration error
Calibration Err.
Please check paper.
Red
Red
Yes
Waiting for macro to
execute
*1
Press a key
-> Executing macro
Flashing
green
—
No
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
