Citizen CT-S310II, Service Manual

Page: 6 / 61

CT-S310II Series Service Manual
INTRODUCTION
This manual describes the disassembly, reassembly, and maintenance procedures of CT-S310II
Series.
1. DISASSEMBL Y AND REASSEMBLY
Note the following items when performing maintenance of the printer.

Do not disassemble, reassemble, or adjust the printer unnecessarily when the printer operation is
satisfactory.

Do not loosen the screws that fasten the components unless it is absolutely necessary.

After finishing inspection, perform a check to ensure that there is no irregularity before turning on the
printer.

Use caution not to leave any part or screw used for maintenance inside the printer.

When handling the print head and electronic components, care must be taken to avoid static electricity.

When disassembling or reassembling the printer, check the wires and cords for damage. Do not draw
any wire or cord by force.

Lubricate the components as necessary when reassembling them.
1-1. T ools Used

Phillips screwdriver #0, #1, and #2

Tweezers (metallic not allowed)

Long-nose pliers

Brush
- 4 -