— 17 —
3.2 Connecting Power Cord and Data Cable
[In case of NN type]
1.
Make sure the power supply for the opposite equipment to be connected is
OFF.
2.
Prepare the power supply that can supply the supply voltage and current
capacity designated in the specifications (DC 24 V ±10%, 1.2 to 1.5A (9A or
more at peak current).
3.
Pass ferrite cores one by one while checking the pin number of the wiring
cable for connection to the opposite equipment. For pin numbers, refer to
“5.4 Power Supply and Interface Connector Specifications”. Be sure to use
the Ferrite core if you make the cable by yourself.
Wiring cable NN type
Opposite equipment
4.
After making sure the printer power is OFF, orient the connector correctly
and firmly connect it to the printer.
Ferrite core
5.
Connect the printer FG terminal to ground. Be sure to make this connection
to prevent noise, static charge, etc. Firmly make this connection using the
terminal screw at the rear of the printer.
FG terminal
