CKG counting scales user’s guide
- - 3
Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning
vents.
Avoid unsuitable tables. The tables or floor must be rigid and not vibrate. Do not place near
vibrating machinery.
Avoid unstable power sources. Do not use near large users of electricity such as welding
equipment or large motors.
Avoid high humidity that might cause condensation. Avoid direct contact with water. Do not
spray or immerse the scales in water.
Avoid air movement such as from fans or opening doors. Do not place near open windows.
Keep the scales clean.
Do not stack material on the scales when they are not in use.
3.2 INSTALLATION of CKG SERIES
The CKG Series comes with a stainless steel platform packed separately. Place the
platform in the locating holes on the top cover. Do not press with excessive force as this
could damage the load cell inside.
Level the scale by adjusting the four feet. The scale should be adjusted such that the
bubble in the spirit level is in the center of the level and the scale is supported by all four
feet. If the scale rocks readjust the feet.
Attach the main cable to the connector on the bottom of the scale. The power switch is
located on the base near the front of the scale.
SECTION 4 KEY DESCRIPTIONS
0-9,
•
Numeric entry keys, used to manually enter a value for tare weights, unit weight, and
sample size.
CE
C
Summary of Contents for CKG-15K
Page 1: ...Table Top Counting Scales CKG Series...
Page 17: ......
